Publicidad
Idiomas disponibles
Idiomas disponibles
3. Installation
Notice: The electric towel warmer can be operated
both as a freestanding device and as a wall-moun-
ted device.
3.1 Installing the aluminium stands
A
Attach the decorative caps
corresponding openings on the top of the
device (see Fig. A).
B
Now assemble the aluminium stands 6 using
the four M3.5 x 12 mm Phillips screws 9
provided to attach the aluminium stands 6
(see Fig. B).
10
GB/NI/IE/CY/MT
3.2 Wall mounting
C
1
to the
Fasten the decorative caps 1 to the openings
provided before you begin mounting the unit to
a wall (see Fig. A).
Place the wall brackets 2 on the product in
your desired position. Figure C shows an exam-
ple of how to position the wall brackets 2 .
D
ATTENTION! RISK OF DEATH, PERSO-
NAL INJURY AND DAMAGE TO PRO-
PERTY! Read your drill's operating and
safety instructions carefully.
RISK OF FATAL INJURY! Take care to
avoid hitting electricity, gas or water pipes
when drilling into the wall. If necessary,
check with a cable detector before drilling
into a wall.
E
Publicidad
