Publicidad
Idiomas disponibles
Idiomas disponibles
Operating System
Ambient Room Temperature Limits:
This appliance is designed to operate in temperatures specified by its temperature class on the rating plate.
Class:
Extended Temperate
Temperate
Subtropical
Tropical
Control Panel
1
2
Names
1
Power button
2
Temperature button
Temperature setting
3
button
4
LED display
5 & 6 Plus / Minus button
7
Light button
8
Sabbath mode
Setting The Temperature Controls
•
When you push the (+) or (-) buttons for the first time, The LED display will show the temperature that is currently on.
•
With in the 3 min while there is no operation, The appliance will locked automatically. To unlock, press (﹢) and (-) at
the same time for 3 seconds to unlock.
•
To select the temperature, stay on the chosen temperature until the flashing stops. The temperature setting can be
adjusted from 2ºC to 10ºC.
10
Symbol
SN
﹢10ºC/ 50ºF to ﹢32ºC / 89.6ºF
N
﹢16ºC / 60.8ºF to ﹢32ºC / 89.6ºF
ST
﹢16ºC / 60.8ºF to ﹢38ºC / 100.4ºF
T
﹢16ºC / 60.8ºF to ﹢43ºC / 109.4ºF
O
3
4
Press and hold for 3 seconds to turn the appliance on or off.
Press to switch between Celsius and Fahrenheit temperature display.
Before adjusting the temperature, press the button. The display will flash and it will show
the current temperature setting. After 5 seconds, the flashing will stop and you can begin
to adjust the temperature by pressing (+) or (-).
2-digit LED display
The "+" and "-" buttons are used to adjust the temperature. Each press of the button will
increase or decrease the temperature by 1ºF / 1ºC.
To turn the light on or off. When door is open, the light will automatically be switched on.
To enter Sabbath mode, press and hold "+" button for 3 seconds to activate the feature.
The appliance will automatically exit Sabbath mode after 42 hours. Alternatively, you can
manually exit Sabbath mode. Note that in Sabbath mode, the light will not work, but the
compressor will continue to run.
Ambient Temperatures range(ºC / ºF)
ºC
ºF
Function
O
5
6
7
Publicidad
