Publicidad
Idiomas disponibles
Idiomas disponibles
Operating System (continued)
Removing and installing the drawers
To Remove the drawers.
1. Open the drawer completely all the way.
2. On the sliding track on both sides of the drawer, there is a locking bar (A & B). On the left side (A) push down the
locking bar and at the same time , on the right side (B) lift up the locking bar. While holding the locking bar in position,
gentile pull the drawer towards you. Keep pulling slowly until is fully remove from the track.
3. To re-install the drawers, place the track (C) parallel to the slot (D) and push in the drawer. Have a test run to verify if
the installation is done properly.
Cutout
Locking Bar
A
D
B
C
11
Publicidad
