Publicidad
Idiomas disponibles
Idiomas disponibles
Pressmatic Portable CCA
CODE
60196
60197
85000
Battery
85001
Quick charger
85004
85002
Connection
85003
Pressmatic CCA
CODE
60194
60195
Radial press fitting plier
CODE
68450
For use of the pressing tongs, pressing heads and expanding heads for the various pipe
connection systems, the currently valid sales documents are applicable. If the system manufac-
turer alters components of pipe connection systems or markets new ones, must be enquired
their current application status.
Electrical connection
Before connecting the drive unit or the rapid charger, check whether voltage on the rating
plate matches the mains voltage. At work sites, in damp surroundings, in the open or in the case
of comparable types of use, only operate the equipment off the mains using a 30mA fault cu-
rrent protected switch.
The battery supplied and the spare batteries are not charged. Charge the battery before
initial operation. Only use the rapid charger for charging. Once the battery is inserted into the
rapid charger, the red indicator light flashes. After about one hour, the indicator light switches
to permanent, meaning the battery is charged. The battery only reaches its full capacity after
several charges.
Installing the pressing tongs in radial presses
Pull the mains plug or remove the battery. Only use pressing tongs with a system-specific
pressing contour matching the press fitting system for identify the pressing contour matching the
press fitting system for pressing. Pressing tongs have a letter on both pressing jaws to identify
TECHNICAL DATA
VOLTAGE
CAPACITY
230V 50-60 Hz
10-76 (108)
110V 50-60Hz
12V, 2.0 Ah
230V, 50-60Hz, 50W
110V, 50-60Hz, 50W
230V
110V
VOLTAGE
CAPACITY
230V 50-60 Hz
110V 50-60Hz
LENGTH
WEIGHT
655mm
PREPARATIONS FOR USE
WEIGHT
4.5 Kg
WEIGHT
4.8 Kg
2.84 Kg
BATTERY
Yes
BATTERY
450W
No
13
Publicidad
