11. Stop switch with throttle position adjustment
12. Throttle control
13. Standard nozzle
14. Control pipe
15. Handle
16. Handle holder
17. Clamp
18. Pipe angle
19. Engine cover
20. Spark plug
21. Starter rope handle
22. Fuel tank
23. Throttle control
24. Stop switch
25. Combination wrench
26. Operator's manual
Symbols on the product
WARNING! This product is dangerous.
Injury or death can occur to the
operator or bystanders if the product
is not used carefully and correctly.
To prevent injury to the operator or
bystanders, read and obey all safety
instructions in the operator's manual.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use approved hearing protection
and approved eye protection. If the
environment contains dust, use a
breathing mask.
Use approved protective gloves.
Mixture of gasoline and two-stroke oil.
Air purge bulb.
Stop.
2318 - 003 - 02.04.2024
Stop.
Start position (EBZ9000).
Start button.
Keep all parts of your body away from
hot surfaces.
15m (50ft)
yyyywwxxxxx
Note:
Other symbols/decals on the product refer
to certification requirements for other commercial
areas.
EPA III
The Emissions Compliance Period referred to on
the Emission Compliance label indicates the number
of operating hours for which the engine has been
shown to meet Federal emissions requirement.
Maintenance, replacement or repair of the emission
control devices and system may be performed
by any nonroad engine repair establishment or
individual.
Look out for thrown ob-
jects. Thrown objects
can cause serious injury.
Use personal protective
equipment.
Keep a safety distance
at a minimum of 15 m to
persons or animals.
The rating plate or the
laser printing shows the
serial number. yyyy is
the production year and
ww is the production
week.
3