Jatrhg S1-72-8M Instrucciones Instalación página 11

Instructions before use
►
Current and Scheduled Time Setting should be made before plugging the connector into the
electric vehicle:
►
The installation and connection of this charging device to the power grid must be operated by
professional personnel.
►
During the installation, maintenance or replacement of the charging station, the power supply
must be cut off to prevent electric shock.
►
The power supply must be consistent with the requirements of this charger, and the ground wire
must be reliably grounded.
►
All tools used should be insulated to prevent exposed metal parts from touching the metal frame,
causing a short circuit.
►
Do not modify, retrofit, or change any part by yourself under any circumstances.
►
Please strictly follow the design parameters and operating conditions during use and do not
exceed the threshold in this user manual, otherwise the equipment may be damaged.
►
Ensure the service life and operation of the mobile charger are stable, and the environment for
use of the equipment should be kept as clean, constant temperature and humidity as possible.
The mobile charger must not be used in the presence of volatile gas or flammable atmosphere.
►
Keep the charger away from children.
Usage Steps:
Step 1. Turn on the power
Turn on the power. At the top right corner of the machine, there is a power button
that you need to press to turn on the device. Once the power is on, the screen will
light up and display "System Starting Up..." in the Notification section.
You will need to wait a few seconds for the system to load the program, until the
"System Starting Up..." message disappears.
Step 2. Setting the Language:
Initially, the system defaults to an English interface. If you wish to
switch to French, German, Spanish, or Italian, press and hold the
current button for 3 seconds to switch to French, then another 3
seconds to switch to German, followed by Spanish and Italian.
Release the button once the desired language is displayed to
confirm your selection. The system will save your choice and
automatically apply it the next time the machine is powered on.
Stpe 3. Setting the Current:
The screen will display the current selection under "Current". If you need to adjust it, simply
press the current button to cycle through different current options. The system will save your
last selection and automatically apply your settings the next time the machine is powered
on.
10