Publicidad
Idiomas disponibles
Idiomas disponibles
Mode and LED indicator Overview
Standby
When no current flows from the charging station to the electric vehicle, this condition is
collectively referred to as Standby mode. This mode is divided into four states:
Standby State 1:
The Type 2 EV connector is not inserted, but the JATRHG charging station
is ready. At this time, the LED indicator flashes blue.
* In State 1 mode, if no button press or plug insertion is detected within two minutes,
the screen will power off and the system will enter sleep mode. Any button press or
plug insertion will wake the system from sleep mode.
Standby State 2:
The Type 2 EV connector is inserted, but a charging schedule has been set
on the JATRHG charging station. The LED indicator is steadily blue with a countdown delay
displayed.
Standby State 3:
The Type 2 EV connector is inserted, and the JATRHG charging station is
ready, but the vehicle's S2 switch is not activated. In this case, the LED indicator remains
steadily blue.
*When the vehicle's S2 switch is off, it indicates that the car does not permit charging.
This could be due to several reasons, such as:
1.
You have set a scheduled waiting time on the vehicle side.
2.
The connector plug is not fully inserted.
3.
The vehicle's self-diagnosis did not pass.
Standby State 4:
The Type 2 EV connector is inserted, and the vehicle is fully charged. At
this time, the LED indicator is steadily green.
12
Publicidad
