Pahlen LED 170AP Manual Del Usuario página 7

LED Lighting Element 170AP
It is important to carefully read through this manual to secure the poll equipment's function and service life.
Pahlén AB is not liable for product warranty or damage as a result of improper installation, wrong usage or incorrect maintenance.
Product Information
This product contains a light source with energy efficiency class G.
Lighting input for niche mounting under water in different types of frames for swimming pools. It fits all Pahléns lighting Type 300,
both Classic and Marine design.
OBS! The lamps should only be used under water.
Available in the following colours: red/green/blue (RGB). The RGB lamp is an advanced electronically controlled light based on
LEDs in the three colours, red, green and blue. These three colours together can create many other ones. With the help of the on/
off switch, it is possible to select one of the 14 different pre-programmed light effects.
To be able to take advantage of additional features, such as dimming of the RGB lights, a PLP REM or PLP REM device is
separately sold.
Technical data
Power:
Colour Temperature:
Light Flow:
Voltage:
Lamp's enclosure class:
Maximum water temperature:
Dimmable (with a control unit):
Installation
The niche shall be mounted in the frame according to the MA50-11 instructions. Power shall be turned off.
1. The lighting element's cable shall be mounted on the LED module, see section "Install the LED module's cable like this" in this
manual.
2. The supplied sleeve should be placed on the lighting element's cable.
3. Thread the lighting element's cable into the cable pipe. Position the sleeve (3) at the niche's cable fitting. Then tighten the
screw fitting on the lamp niche to seal the cable.
4. The excess cable wraps behind the light and then the lighting element is screwed in the niche.
5. Connect the cable to the connection unit.
6. Install the front ring.
Typ CA
Pool frame dressed
in liner
2
4
5
Installation LED Moonlight
RGB
66W
—
3700 lm
10-14V AC 50/60Hz
IP68 (measure at 3m)
+40˚C
Yes
6
7
Surface treatment Designed by:
E
The tolerance class in accordance with this Assembly drawing no.
part of ISO 2768-1
Installationsbild
belysning typ 300CA LED
för pool med duk
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Typ A
Concrete pool frame
dressed in tile/mosaic
2
4
5
7
Drawn by: Date Approved by:
TS 2011-11-30
Art.no.
Scale Revised by: Date
Drawing number Rev.no.
M11604 0
7
ENGLISH
3
1. Niche type A
3
1. Niche type CA
1. Niche
2. Light Element
6
3. Gasket Sleeve
4. Screw M5x20 (2x) type A
Screw M5x50 (2x) type CA
Surface treatment
E
5. Front The tolerance class in accordance with this Assembly drawing no.
part of ISO 2768-1
Installationsbild
6. Countersunk screw M5x10 (4 pc)
belysning typ 300A LED
för betongpool
Box 728, SE-194 27 Upplands Väsby, Sweden 7. Nylon plate (6x)
Phone +46 8 59411050, Fax +46 8 59086880
REV DESCRIPTION DATE APP
1 2018-10-22
Surface treatment Designed by: Drawn by: Date Appr
E
ASA 2018-10-22
The tolerance class in accordance with this Assembly drawing no. Art.no.
part of ISO 2768
Scale Sheet size Revi
A3
Drawing number
Nisch med tätni
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Designed by: Drawn by: Date Approved by:
ASA 2011-12-01
Art.no.
Scale Revised by: Date
TS 2012-03-19
Drawing number Rev.no.
M11605 1