Descargar Imprimir esta página

Fulgor Milano Sofia F6PGR364GS2 Manual De Uso Y Cuidado página 32

Ocultar thumbs Ver también para Sofia F6PGR364GS2:

Publicidad

Idiomas disponibles

Idiomas disponibles

15 - Gas Cooktop Griddle Operation
EN
GRIDDLE BURNER KNOB
ATTENTION
The range must be level for the griddle to operate properly.
CAUTION
• Do not overheat the griddle. This can damage the coating
of the griddle.
• Do not use metal utensils that can damage the griddle
surface.
• Always turn off when not in use or lower the heat between
cooking loads.
• Do not use the griddle for other purposes, for example, as
a cutting board or a storage shelf.
• Do not cook excessively greasy foods. The grease may
spill over.
• The griddle may become very hot. Use oven gloves when
placing or removing the griddle.
• Do not remove the griddle until the cooktop grates,
surfaces, and griddle itself cool down.
• The griddle is quite heavy. Use both hands when placing
or removing the griddle.
Cooking Tips
• Preheat the griddle plate for about 20 minutes, then set the
desired temperature.
• Use liquid cooking oil, cooking sprays, or butter for eggs,
pancakes, French toast, fish and sandwiches. This will help
reduce sticking. (Only use fats/oils that can tolerate high
temperature)
• Pat down wet food items with paper towel to prevent
splatters during grilling.
• Remove food particles with a metal spatula during cooking
to make the cleanup easier and to avoid including those
particles in the food.
28
Griddle Cooking Chart
Food
°F
Eggs
250 - 300
Bacon
325 - 350
Pancakes
375 - 450
French Toast
425
Fish Fillets
300
Vegetables
300
Burgers
350
Steaks
350
IMPORTANT
After each cooking make sure to empty and clean the drip
pan and replace it in its proper place under the griddle.
Before cleaning, make sure all controls are off and the
griddle is cool.
1. Remove the griddle plate from the burner base and clean
according to cleaning section.
2. In case Clean the burner box with a damp cloth (keep
the gas injector and glow wire areas free of cleaning agents
and any other material).
3. Replace the Griddle plate, paying attention to the correct
position.
4. Turn on the burner.
If the burner does not light, wait a couple of minutes an
repeat the operation. If the burner still does not light, do
not service the gas burner yourself. Contact a trained repair
specialist.
EXPLODED VIEW OF BURNER GRIDDLE
°C
121 - 149
163 - 177
191 - 232
218
149
149
177
177

Publicidad

loading