Do not expose the appliance to extreme conditions. Avoid:
– high humidity or wet conditions
– extremely high or low temperatures
– direct sunlight
– naked flames.
WARNING!
Risk of fire!
Insufficient air circulation can lead to heat accumula-
tion.
Make sure that the ventilation openings in the housing,
around the appliance and in the installation niche are not
blocked.
To ensure adequate ventilation, a minimum clearance of 5 cm
to the top, 5 cm to the sides and 5 cm to the back must be ob-
served.
Do not install near heat sources such as hobs, radiators, un-
derfloor heating etc. If installation near a heat source cannot
be avoided, use an appropriate insulation panel or maintain
the following minimum clearances to the heat source:
– from electric or gas ovens or similar: approx. 5 cm
– from oil or coal-fired ovens: approx. 30 cm
– If installed next to another refrigerating appliance, a mini-
mum distance of 5 cm from the side is required.
...
Before connection
DANGER!
Risk of electric shock!
There is a risk of electric shock due to live parts.
After installing the appliance, check that the mains connec-
tion cable is not squashed or damaged.
Do not operate the appliance if it has been visibly damaged
or the mains cable or plug is defective.
In the event of damage, contact our Service Centre.
DE
FR
NL
ES
IT
EN
89