Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
• Fill the cleaning bottle with warm water (do not add detergents
or cleaning products, etc.).
• Place an empty container under the tap.
Fully lower the tap handle.
Insert the tap hose into the cleaning bottle. Squeeze the
cleaning bottle until all the water has been drained. A mixture
of beer and water will then flow from the tap. Repeat this
operation at least 2 more times to thoroughly rinse the beer
tap mechanism.
Replacing the beer hose
The beer hose must be replaced if it is damaged.
Remove the cover from the top of the tap.
Fully lower the tap handle. The damaged hose can now be easily
removed from the tap. Remove the clip from the tap. Unscrew
the quick-release connector from the beer hose.
• Install the new beer hose. Reassemble in reverse order.
Note: Do not remove the other screws. This is likely to
lead to beer or gas leaks.
Troubleshooting
Problem
The tap is not
working or cannot
pour beer.
Possible Cause
• The beer hose is not
properly connected.
• There's either no beer keg
or no more beer left in the
beer keg.
19
Solution
• Properly connect the beer hose.
• Change the beer keg.
EN
Publicidad
