INQUA 1.2 BR027100 Instrucciones De Uso página 59

5.3 Cleaning with warm drinking water

Use a small, clean brush to remove heavy soiling. For
hygiene reasons, this brush must be used exclusively for
cleaning the nebuliser.

Then rinse all parts thoroughly (for a least 1 minute) in warm
running water (approx. 40 °C without dishwashing liquid) to
remove all remaining dishwashing liquid.

Pour out the water that has collected in the individual parts.
You can remove excess water more quickly by shaking the
parts.

Place the disassembled compo-
nents in warm drinking water with a
little dishwashing liquid with no skin
protecting or disinfecting additives
(dosage according to the manufac-
turer's recommendations) for about
5 minutes, until the residues of the
inhalation solution and other con-
taminants are removed.
en
59