Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
6.
Do not place any objects on top of the appliance, as this will interrupt the airflow and
affect the cooking result.
7.
You will hear a loud noise caused by the internal pump during the first use: this is normal
and does not indicate a malfunction.
Air fryer
1.
Insert the power cord into an earthed wall socket.
Remove the basket from the air fryer. Fig. 6
2.
3.
Make sure that the protective grille is securely in place Fig. 8
4.
Put the basket back in the air fryer. Carefully align the guides of the basket and the fryer
body and insert it. Fig. 4
Note: you should use the fryer with the grille placed inside the basket to promote air flow and
obtain better results.
5.
Determine the time, temperature and oil level for the preparation according to each food,
or select a default programme (see the "Settings" section of the "Operation" section).
Before starting each programme, the device will warm up to improve the preparation
6.
results. The device will show a rectangle loading. This warm-up can take a few minutes.
7.
Place the food in the basket (Fig. 5).
8.
Some ingredients must be stirred halfway through the cooking process. To stir, pull the
basket out of the appliance using the handle and remove the food using a wooden or
plastic kitchen utensil. Then slide the basket back into the air fryer.
9.
When you hear the timer signal, the set preparation time has elapsed. Remove the basket
from the appliance and place it on a heat-resistant surface. Be careful when removing the
basket as it can give off heat and steam.
Note: You can also stop the appliance manually. to do so, touch the power/start/pause touch
icon. if you want to cancel the programme, press and hold the power button.
10. Make sure the food is cooked. If the food isn't cooked enough, slide the basket drawer
back into the air fryer and add a few more minutes to the timer. If this happens when the
programme has finished, the programme will resume preheating, but this will take no
more than a few seconds after the warning, simply remove and reinsert the basket to
start the cooking process.
Warning:
-
Do not touch the basket during operation or immediately after use to avoid burns. Hold the
basket only by the handle.
Never use metal utensils as these can damage the surface.
-
-
do not turn the basket upside down so that the excess oil accumulated in the bottom of the
basket does not spill over the ingredients. The ingredients, basket, and the fryer itself will
be hot. Depending on the type of ingredients cooked, steam may escape from the basket
drawer.
48
CECOFRY RAIN
Operation
1.
The power/start/pause touch icon will remain on after the fryer has been started.
2.
If you press the power/start/pause touch icon, you will hear an acoustic signal and the
display will show "---". The menu icons will light up.
3.
Select the desired menu and make sure that the oil tank is full and properly installed.
4.
If you wish to delay the start of cooking, select a menu and modify the desired values by
pressing the timer icon and selecting the time you wish to delay cooking, then press the
power/start/pause icon to start the process. The time can be set from 0.5 to 24 hours
using the increase and decrease icons.
5.
You can adjust the cooking time from 1 to 60 minutes in one-minute intervals by clicking
on the time icon and changing the time using the increase and decrease icons. The time
can be adjusted during cooking.
6.
You can adjust the temperature from 70 to 200°C in 5°C intervals by clicking on the
temperature icon and changing the temperature using the increase and decrease icons.
Temperature can be adjusted during cooking.
You can adjust the oil spray level from 0 to 7 in increments of 1 by clicking on the oil level
7.
icon and changing the level using the increase and decrease icons. The oil level can be
adjusted during cooking.
8.
Press the power/start/pause touch icon to start the device. The heating element switches
on and off during a complete cycle several times, this is completely normal in order to
keep the temperature of the basket constant.
9.
The control panel display will show a rectangle loading to indicate that the fryer is
preheating. This warm-up may take a few minutes if the device is completely cool. When
the fryer has finished preheating, the display will show "Add Food" and a warning signal
will sound.
10. After hearing the warning signal and seeing the corresponding message on the display,
remove the basket and place the ingredients in the basket (the display will show "PAUSE").
11. After adding the ingredients, place the basket back into the fryer and the fryer will
automatically start the cooking process.
12. When cooking is complete, the display will show "End" for 15 seconds and three beeps
will sound.
13. Press and hold the power/start/pause touch icon to access the menu selection interface.
Once inside, press and hold the power touch icon again to turn the fryer off.
14. The fryer will enter "Stand-By" mode after 5 minutes without selecting any option.
Menus
The following table shows the temperatures and times of the menus:
ENGLISH
49
CECOFRY RAIN
Publicidad
