Publicidad
Idiomas disponibles
Idiomas disponibles
Component List:
Left Front
Flare
Left Front
Inner Piece
If your flares already have the edge trim and pocket hardware installed, skip to Front Flare
Installation Step 4.
STEP 2 - EDGE TRIM INSTALLATION
A. Peel two to three inches of red vinyl backing away from Edge
Trim (GP1-0025) tape. Applying the adhesive side of the edge trim
to the inner side of the flare, affix the edge trim to the top edge
of the f l a re (the portion that comes in contact with the vehicle).
B. Press edge trim into place along the top edge of the flare in one-foot
increments, pulling red vinyl backing free as you continue to work your
way around the top edge of the flare.
Pocket Hardware Installation (Pocket Style Only):
Put a Washer (WA1-0029) on each Bolt (SW1-0087).
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-234-8920 (USA AND CANADA) • FAX 800-438-3788
Right Front
Flare
Right Front
Inner Piece
1
Left Rear
Flare
Put each Bolt/Washer combination through a pocket
hole in the flare, Bolt head and Washer on the
outside.
Right Rear
Flare
2
Publicidad
