BUSHWACKER VML3Z-16268-A Manual Del Usuario página 4

Install U-Clips (CL1-0022) on inner brackets.
Using a socket wrench, reinstall the factory screws
through the inner piece.
Position flare on fender, pressing inward on the flare,
line up the flare mounting holes with the mounting
clips on the inner piece. Install four Phillips Truss
Screws (SW1-0058) through the flare and into the
clips on the inner piece. Install and tighten.
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-234-8920 (USA AND CANADA) • FAX 800-438-3788
8
Line up the holes in the inner piece with the three
uppermost factory holes. NOTE: Both inner brackets
are universal.
10
Hold flare to fender, re-install three factory screws
removed in Step 4 using sockets and wrench.
12
Completed front flare installation.
9
11
13