Descargar Imprimir esta página

Parkside PDSS 310 A3 Instrucciones De Utilización Y De Seguridad página 28

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 71
Troubleshooting / Information about warranty and service processing
Troubleshooting
Note: Regular lubrication is imperative to ensure
the longest possible life for your compressed air de-
vice. We recommend continuous lubrication via the
included lubricator
.
11
Faults
Possible causes
Impact driver not
Trigger
working
No compressed air supply
Leak in compressed air
system
Compressor defective
Defect inside the air tool
Not properly tight-
Air pressure too low
ening screw
Not loosening
Torque is too low
screw
Rusted screw
Information about warranty
and service processing
Creative Marketing Consulting GmbH
warranty
Dear customer, the warranty for this device is 3
years from the date of purchase. In the event of
product defects you have legal rights against the
retailer of this product. Your legal rights are not li-
mited in any way by our warranty detailed below.
28 GB/IE
Action
not pulled
Pull trigger
4
If applicable, drain condensation from tube (water
bag)
Straighten kinks in the hose
Connect compressed
Remedy leak
Verify the compressor is supplying compressed air. If
necessary, have compressor repaired by a qualified
professional
Have air tool repaired by a qualified professional
Increase air pressure.
ATTENTION! Never exceed the maximum ap-
proved operating pressure of the air tool!
Turn torque control
Apply rust remover to screw
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe lo-
cation. This document is required as your proof of
purchase.
Should this device show any fault in materials or
manufacture within three years from the date of
purchase, we will repair or replace it - at our choice -
free of charge to you. Warranty services require
the defective device and the proof of purchase (sales
receipt) to be presented within the three-year period
After every maintenance verify the equipment
is still operating as originally.
4
air
2
to a higher setting
3
Warranty terms

Publicidad

loading