Micropoint qLabs ElectroMeter Plus Manual De Instrucciones página 103

NOTE:
• A qLabs eStation, qLabs
®
support the upload/print function.
OFF
SET
VER
NOTES:
• Test results are automatically stored in the qLabs
Plus memory including all the information of the test (See Section
10 for reviewing past results).
• The qLabs
®
the memory is full, the new test result will overwrite the oldest test.
9.10 Results and Explanation
Please read qLabs
test results.
9.11 Finishing the Test
Remove and discard the used test strip into a sharps or other puncture
proof container. It is recommended to power off the qLabs
Plus when it is not in use.
11.6 PT 0.8 INR
20.6 APTT 0.57
5
0123456789123
-
OFF
SET MEM
VER
eCable or Bluetooth is needed to
®
When the "
ElectroMeter Plus will prompt the user to
remove the test strip.
MEM
ElectroMeter Plus can store up to 200 test results. If
Test Strips Package Inserts for detailed explanation of
®
Before turning off the meter, press the "
button to return to the test mode.
+
Remove the test strip from the meter.
To perform another test, please use a fresh
test strip. Please use a different finger for a
new test.
" button is pressed, the qLabs
25
EN
ElectroMeter
®
ElectroMeter
®
"
®