Micropoint qLabs ElectroMeter Plus Manual De Instrucciones página 91

8. qLabs
®
Follow the steps below to set up the qLabs
8.1 Enter Setup Mode
OFF
SET MEM
VER
SETTING
LOGOUT
DATE/TIME
NORMAL APTT
PATIENT ID
SETTING
OPERATOR ID
BLUETOOTH
LOT NUMBER
BACKLIGHT
8.2 Logout Setting
LOGOUT
123456789
NO
BACK
-
OK
Notes:
After completing the "SETTINGS" screen, the meter saves the changes
automatically and returns to "SETTINGS" screen if "OK" is pressed; if
"BACK" is pressed, the meter returns to "SETTINGS" screen without
saving the changes.
ElectroMeter Plus Settings
When the qLabs
on, the display screen will prompt the user to
insert a test strip automatically.
s
When the screen prompts the user to insert
a test strip, press the functional "SET" button
to enter the Setup mode.
s
In "SETTINGS" screen, use "+" and "-" to
switch between different items. The meter
prompts to insert a test strip if "BACK" is
pressed. The meter enters the selected item
accordingly if "OK" is pressed.
Use "+" or "-" to select "YES" or "NO". When
"YES" is selected, press "OK" to re-enter
"OPERATOR ID" scanning screen. When
"NO" is selected, press "OK" to return to
"SETTINGS" screen.
+
ElectroMeter Plus.
®
ElectroMeter Plus is turned
®
13
EN