Topcom BUTLER 930 Manual De Usuario página 27

Base or handset do not
ring
Tone is good, but
cannot make any
connection
Not possible to transfer
a call on PABX
Telephone does not
react to pressing the
keys
17 Technical characteristics
Standard:
Frequency range:
Number of channels:
Modulation:
Speech coding:
Emission power:
Range:
Base power supply:
Handset Batteries:
Handset standby time:
Handset talk time:
Charging time:
Dialing mode
Normal conditions of use:
Flash time:
18 Topcom Warranty
18.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day
the new unit is purchased. There is no warranty on standard or rechargeable batteries (AA/
AAA type).
Consumables or defects causing a negligible effect on operation or value of the equipment
are not covered.
The warranty has to be proven by presentation of the original or copy of the purchase receipt,
on which the date of purchase and the unit-model are indicated.
Butler 930
The handset is not registered to
the base
The ringing volume is zero or
low
The dialing mode is wrong
The Flash Time is too short
Manipulation error
DECT(Digital Enhanced Cordless Telecommunications)
GAP ( Generic Access Profile )
1880 MHz to 1900 MHz
120 duplex channels
GFSK
32 kbit/s
10 mW ( average power per channel )
300 m in open space / 50 m maximum in-house
In: 230V AC / 50Hz - Out: 7,5V DC / 300mA
3 rechargeable batteries AAA, NiMh 600mAh
100 hours in standby
10 hours
16 hours
Tone / Pulse
+5 °C to +45 °C
100ms or 300ms
Register the handset to the
base
Adjust the ringing volume
Adjust the dialing mode (pulse/
tone)
Change the Flash Time
Remove the batteries for at
least 1 minute and put them
back in place
Butler 930
27