TECO 36 SPECIAL Manual De Instrucciones página 99

- Once you have mounted the first bead, repeat
the same steps for the second bead (fig.27).
- Move the operating arms to the "non-work-
ing" position.
- Release the wheel and remove it from the
tyre changer.
Special tools
To make it easier to mount/demount low profile
tyres, it is advised to use the bead presser grip-
per (optional accessory supplied on request).
9.7. TYRE INFLATION
9.7.a. Safety Indications
User's manual
27
• RISK OF EXPLOSION
• Never exceed tyre pressure recommended by tyre
manufacturer.
• Always match the tyre and rim dimensions.
• Take care to avoid any damage to the tyre.
• During inflation, keep outside the vertical cylinder
area occupied by the wheel.
D
DANGER
EN
26
99