Publicidad
Idiomas disponibles
Idiomas disponibles
Caution: Do not touch the pot during and some time after use, as it gets very
hot. Only hold the pot by the handle.
5. Determine the required preparation time for the ingredient (see section
'Settings' in this chapter).
6. Air fryer with shake reminder function; By default, the alarm will be sent
one third of the time after the first setting, that is, the buzzer will sound and
the shaking indicator will light up. Take out the Pot and shake the food well.
Put the Pot back into the air fryer. The light goes off and the buzzer stops.
7. When you hear the timer buzzer, the set preparation time has elapsed.
Pull the pot out of the appliance.
Note: Press and hold the power button for 2 seconds, then you can switch
off the appliance manually.
Tip: You can adjust temperature or time according to your taste during use.
Your settings will be kept for about 60 mins after you pull the pot out of the
body.
8. Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pot back into the
appliance and set the timer to a few extra minutes.
9. To remove ingredients (e.g. fries), pull the pot out of the Air fryer and
place it on trial framework. Do not turn the basket upside down, as any
excess oil that has collected on the bottom of the pot will leak onto the
ingredients. The pot and the ingredients are hot. Depending on the type of
the ingredients in the air fryer, steam may escape from the pot.
10.Use clips or tools to transfer food to a plate
11.When a batch of ingredients is ready, the Air fryer is instantly ready for
preparing another batch.
8
www.NutriChefKitchen.com
Publicidad
