Eaton TRIPP LITE Serie Manual Del Usuario página 3

1. Closure Assembly
1.2 Install the Uncut Cable
1
Unlock the limiting button to turn over all the splicing trays from the bottom
(Figure 1-2).
2
Remove the cable clamp from the cable entry (Figure 1-3).
04-065-93-47C0_revA.indb 3 04-065-93-47C0_revA.indb 3
Figure 1-2: Turn over all the trays
Figure 1-3: Remove cable clamp
3
1/31/2024 3:43:05 PM 1/31/2024 3:43:05 PM