Replacing An Oven Light - Haier HCW3485AES Manual Del Usuario

2. Move the hinge brackets back down into position.
3. Close and open the door slowly to assure that it is correctly and securely in place.

REPLACING AN OVEN LIGHT

Make sure the oven and lights are cool and power to the oven has been
turned off before replacing the light bulb(s).
The lenses must be in place when using the oven. The lenses serve to
protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
•
Each oven is equipped with three
halogen lights (per cavity) located in
the lateral walls of the oven.
•
The lights are switched on when the
door is opened or when the oven is in
a cooking cycle.
•
The oven lights are not illuminated
during SELF- CLEAN.
•
Each light assembly consists of a
removable lens, a light bulb as well as
a light socket housing that is fixed in
place. See figure on this page.
•
Light bulb replacement is considered
to be a routine maintenance item.
WARNING
Electrical Shock Hazard
39