Phonocar VM168 Manual De Instrucciones página 33

3.3.1 BRACKET MONITOR
3
Fig. 1
Fig. 4
Fig. 6
BRACKET FIXING (3)
Place the two gaskets at the holes on the left and right sides of the monitor (Fig.
1/2/3).
Hook the bracket by matching the small pin to the corresponding slot on the gaskets
(Fig. 4).
Tilt the monitor and secure with the four screw knobs (Fig. 5/6/7).
Attach the anti-vibration double-sided tape to the base of the bracket, removing the
shaped parts (Fig.8).
N.B. Locate the position for the installation of the monitor so that it does not obstruct
the view or the proper operation of safety devices and/or lack the full freedom of
movement necessary for safe driving.
Fig. 7
Fig. 2
Fig. 5
Fig. 8
33
VM168
EN
Fig. 3