Publicidad
Idiomas disponibles
Idiomas disponibles
VM168
EN
7.5 MANUAL CAMERA ENABLE/DISABLE
L
Enabling the camera is used to be able to display images on the
channel dedicated to it and to make the DVR function active on the
camera.
Up to a maximum of 4 cameras can be enabled.
N.B. CAMERA ENABLEMENT IS REQUIRED FOR PAIRING WITH
THE MONITOR.
Enter the main menu (E), use the UP (B) and DOWN (C) buttons to
select the "Cam-Setup" function (L) and confirm with the SEL (F)
button.
Use the UP (B) and DOWN (C) buttons to select the channel
dedicated to the camera you are installing.
Ex: Camera 2, select "WEBCAM 2" (icon will light yellow) and
confirm with SEL (F) button (icon will light red).
Using the UP (B) and DOWN (C) keys, select:
"ON" to enable the camera and activate the DVR function.
"OFF" to disable the camera and stop the DVR function.
Press the SEL (F) key to confirm.
42
Publicidad
