Phonocar VM168 Manual De Instrucciones página 41

7.4.1 CHANGE MONITOR DISPLAY
NORMAL
B
BELOW
7.4.1 CHANGE MONITOR DISPLAY
You can change the general display of the monitor to the following
modes depending on the installation:"Normal/Mirror/Overhead"
Ex: If the monitor is installed upside down to display images
correctly set the "upside down" mode.
Hold down the "UP" key (B) until the display changes and release.
Repeat until the desired display is found.
MIRROR
MIRROR + UPSIDE DOWN
The sequence of displays is as follows:
• Mirror
• Upside down
• Mirror + upside down
N.B. This change affects all screens.
41
VM168
EN