Manuales relacionados para Truper ROTO-1/2A9
Resumen de contenidos para Truper ROTO-1/2A9
- Página 1 Manual Hammer drill 1.1 Hp 1/2” Power Chuck Applies for Code Model 14659 ROTO-1/2A9 ROTO-1/2A9 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Manual before Parts using the tool. Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Notes Authorized Service Centers Warranty Policy ROTO-1/2A9 ENGLISH...
- Página 3 Technical Data ROTO-1/2A9 Code 14659 Description Hammer drill Chuck 1/2” Voltage 127 V Frequency 60 Hz Current 6.75 A Power 1.1 Hp Speed Drill: 0 - 3 100 RPM Hammer drill: 0 - 50 000 Strokes/minute Drill Capacity Metal: 1/2” | Concrete: 1/2” | Wood: 1 1/4”...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for drills and hammer drills Choose the right bit While operating the hammer drill CAUTION • Choose the right bit for the work piece. • Use the auxiliary handles, if supplied with the tool. It reduces the risk of severe injury and makes the job easier. Loss of control may result in personal injury.
- Página 6 Parts Depth Impact-Rotation control rod selector Handle Chuck Auxiliary Rotation Continuous handle direction Speed operation button button control Switch Power cord protector Power feed cable Chuck Chuck key wrench holder Assembly 1. Turn the auxiliary handle clockwise to release it. The Depth control rod opening of the mount will passes freely over the chuck.
- Página 7 Start Up Chuck Bit fitting • Put the bit into the chuck until it stops. Fasten with the chuck wrench and tighten alternately the chuck into each of the orifices. WARNING Clean burrs and any other foreign objects from the drill bit and drill bit, otherwise the drill bit may not be tight and cause serious personal injury.
- Página 8 Start Up Adjusting auxiliary handle and depth control rod • Turn the auxiliary handle as indicated in the figure. When the auxiliary handle mount is loose, turn it into the desired position. Turn the auxiliary handle in a reverse direction to fix it in the new position.
- Página 9 Maintenance Chuck change • Remove the auxiliary handle and open the chuck jaws. • Using a screwdriver remove the left-threaded safety screw with a clockwise movement. • Fit the long side of a Hex. key (not included) in a vise and insert the short side of the Hex.
- Página 10 Notes ENGLISH...
- Página 11 In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center. AGUASCALIENTES DE TODO PARA LA CONSTRUCCIÓN...
- Página 12 . Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Stamp of the business.