5. It is not forbidden to fill the water tank when the device is switched on. To
refill the tank, switch off the device and let it cool down to avoid skin contact
with hot steam and heated parts.
6. To switch off the device, set the I/O switch to the "O" position and
disconnect from the power supply.
7. When you have finished working with the device and allowed it to cool down,
always empty the residual water from the tank to avoid limescale deposits.
INSTRUCTIONS FOR USE
•
Start ironing with steam by testing on a small area of the fabric in the least
visible place.
It is forbidden to add detergents, fragrances etc. to the water tank. It may
•
damage the device.
•
Avoid kinking the steam hose.
Always try to straighten the garment on the hanger as much as possible by
•
hand before ironing.
•
Depending on the garment to be ironed perform vertical or horizontal
movements. Follow the clothing manufacturer's recommendations.
Garments of considerable thickness require longer steam ironing.
•
Be especially careful when ironing garments decorated with stones,
•
sequins etc., as the hot steam may damage them
It is forbidden to refill the tank with hot water! Filling with hot water may
•
deform the tank.
Always switch off the device when not in use, before moving to another
•
location and when refilling/emptying the water tank.
•
Check the water level in the water tank. Do not switch on the device with an
empty water tank.
It is recommended to wear a protective glove when it is necessary to hold
•
clothes during ironing.
•
It is recommended to use distilled or demineralised water. Using tap water
may cause limescale build-up in the device, which results in reduced
performance.
.