Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS _______________________________
to the ARC output port of the liquid-
crystal display television. Press " „
button repeatedly on the remote con-
trol to select ARC mode.
C
The external device audio
output must be set to PCM.
Bluetooth
Press "STANDBY„ button on the remote
control to power on the sound bar, then
press " „ button on the remote control
to switch the bluetooth mode, the word
"no bt" will be shown on the display
screen, the sound bar is in searching
bluetooth signal status, use your smart
phone to search the bluetooth signal of
the sound bar, select DSB 995 on your
list, input the password 0000 if need
the password prompt, the sound bar
will synchronize to play songs on your
mobile phone while the word "bt" is
shown on the display screen and a
beep will be heard means to be connec-
ted successfully.
Disconnected the bluetooth on the
smart phone to switched off the blue-
tooth connection.
• Bluetooth
range in 10 meters.
• The model DSB 995 in your
C
device was not deleted.
• In bluetooth mode, [PLAY/
PAUSE], [NEXT], [PREVI-
OUS], [VOLUME+/-] etc.
are also active.
Subwoofer connection
Make sure the AC power cord for the
subwoofer is connected to a power
supply securely. Power on the sound
34 ENGLISH
bar, press and hold " „ button for 5 se-
conds, the subwoofer can receive the
wireless audio signal from the sound
bar. when the red indicator flashing on
the subwoofer, the subwoofer is in se-
arching wireless signal status, the blue
indicator keeps lighting on the subwoo-
fer means the sound bar and subwoo-
fer was connected. Press and hold
"PAIR„ button on the Subwoofer or
press and hold " „ button for 5 se-
conds to disconnect with the sound bar
and the red indicator on the subwoofer
flashing when the subwoofer and
sound bar was connected, press "PAIR„
button on the Subwoofer or press and
hold " „ button on the sound bar for 5
seconds again, the subwoofer will be
reconnected with the sound bar.
connection
USB
1. Insert USB storage drive into the USB
2. Press " „ button repeatedly on the
3. The sound bar will start playing the
slot on the rear panel.
remote control to select USB mode.
MP3 track automatically from the
connected USB drive.
C
If play does not start auto-
matically, press "
.
„ button
Publicidad
