Grundig DSB 995 Manual Del Usuario página 38

INFORMATION ________________________________
Subwoofer
Power supply
Subwoofer power consumption
Dimension (WxDxH)
Net weight
Frequency response
Amplifier (Output power)
Total Max.
Main Unit (RMS)
Subwoofer (RMS)
Working environment
TROUBLESHOOTING __________________________
Before resorting to maintenance service, please kindly check by yourself with the
following chart.
Symptom
No Power
There is no sound or
the sound is distor-
ted.
The remote control
does not function.
38 ENGLISH
100-240V~ 50/60Hz
25W / <0.5W (Standby)
200*225*293 mm
5.5 kg
50Hz - 120Hz
220 W
25W (6Ω) x 2
60W (4Ω)
Temperature -10~+35˚C
Relative humidity 5%~90%
Cause(s)
The AC power cord is not
connected to the power
supply or is not connected
to a power supply securely.
• The audio cables aren't
connected securely.
• The volume is set to the
minimum level.
• The sound is switched off.
• There is no battery in the
remote control.
• The battery is out of char-
ge.
• The remote control isn't
pointed to the remote sen-
sor.
• The remote control is out
of its operating area.
• The unit is shut down.
Remedy
Please check that the AC power
cord is connected securely.
• Connect the audio cables secu-
rely.
• Turn up the volume.
• Press [MUTE] on the remote
control to switch on the sound.
• Press [PLAY/PAUSE].
• Install two AAA/1.5V batteries
in it.
• Replace the battery with new
one.
• Make sure that the remote
control is pointed to the remote
control sensor.
• Make sure the remote control is
within the operating area.
• Switch off the unit and discon-
nect it from the AC outlet. Then
power on the unit again.