Descargar Imprimir esta página

VONROC CS506DC Traducción Del Manual Original página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 97
EN
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
d) Under abusive conditions, liquid may be eject-
ed from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explo-
sion. NOTE The temperature „130 °C" can be
replaced by the temperature „265 °F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
Safety information for garden pruners
a) When in operation, keep all body parts away
from the saw chain. Before you start the saw,
ensure that the saw chain is not touching
anything. When using a garden pruner, losing
concentration for just a moment can lead to
clothing or body parts being caught up in the
saw chain.
6
b) Always hold the garden pruner with your right
hand on the rear handle and left hand on the
front handle. Holding the garden pruner the
other way around increases the risk of injuries
and is not permitted.
c) Wear safety glasses and ear protection. Other
protective equipment for the head, hands, legs
and feet is compulsory. Adequate protective clo-
thing will reduce personal injury by flying debris
or accidentaI contact with the saw chain.
d) Do not operate a chain saw in a tree. Operation
of a chain saw white up in a tree may result in
personal injury.
e) Ensure you are standing firmly and only use
the garden pruner if the ground beneath you
is solid, secure and even. Slippery ground or
unstable surfaces such as on a ladder can lead
to loss of balance or loss of control over the
garden pruner.
f) If working on a branch under tension, be aware
that it will spring back. Once the tension in the
wood fi bres has been released, the branch may
hit the operator and/or control over the garden
pruner may be lost.
g) Use extreme caution when cutting brush and
saplings. The slender material may catch the
saw chain and be whipped toward you or pull
you off balance.
h) Carry the garden pruner by the front handle
when it is switched off with the saw chain
pointing away from your body. Always place the
protective cover onto the garden pruner when
transporting or storing it. Careful handling of
the garden pruner reduces the probability of ac-
cidentally coming into contact with the running
saw chain.
i) Follow instructions for lubricating, chain ten-
sioning and changing accessories. Improperly
tensioned or lubricated chain may either break
or increase the chance for kickback.
k) Keep handles dry, clean, and free from oil and
grease. Greasy, oily handles are slippery cau-
sing loss of control.
l) Only saw wood. Do not use the garden pruner
for unintended applications. Example: Do not
use the garden pruner to saw through plastic,
masonry or construction materials not made
from wood. Use of the garden pruner for
unintended applications can lead to hazardous
situations.
m) Hold the power tool only on the insulated hand-
le surfaces, as the saw chain may come into
www.vonroc.com

Publicidad

loading

Este manual también es adecuado para:

S cs506dcS2 cs506dcS3 cs506dc