VONROC CS506DC Traducción Del Manual Original página 8

EN
composition and contents of your set.
Model No.
CS506DC
S_CS506DC
S2_CS506DC
S3_CS506DC
Machine information
Voltage
Chain bar length
Chain length
Chain pitch
Chain gauge
Sound pressure level (LpA)
Sound pressure level (LWA)
Guaranteed LWA
Vibration
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No.
Battery Type
Voltage
Capacity
8
Batteries Chargers
included included
- -
CD801AA CD802AA
2 x CD801AA CD802AA
CD803AA CD802AA
20V
152mm
33T
1/4"
0.043"
79dB, k=3dB
87dB(A), K=3dB(A)
91dB
a =2.8m/s , K=1.5m/s
2
h
1.28kg
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V, 50Hz 0.4A
21V
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
Recommended charger
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA
CD803AA
The following charger of the can be used to charge
these batteries.
CD802AA
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Noise and vibration values were determined accor-
ding to the standards and stipulations mentioned in
the declaration of conformity.
The stated vibration emission value was measured
in accordance with a standard testing procedure
and may be used to compare one power tool to
another.
2
The stated vibration emission value may also be
used for a preliminary exposure assessment.
Vibration level
The vibration emission level stated in this instructi-
on manual has been measured in
accordance with a standardized test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• the times when the tool is switched off or when
it is running but not actually doing the job,
2.5A
may significantly reduce the exposure level.
Protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Front hand protection
2. Handgrip area
CD802AA
0.65 kg
20V, 2Ah Lithium-Ion
20V, 4Ah Lithium-Ion
Quick charger
www.vonroc.com