Publicidad
Idiomas disponibles
Idiomas disponibles
► Avoid to operate the meat grinder unloaded as this may cause wear marks on the
blades. Anyway those marks do not influence the quality or the grinding result.
16.2 Assembling
a) Place the motor unit (1) on
a table. The locking handle
(3) at tube inlet (4) has to
be in horizontal position.
Place the head tube (7) into
the tube inlet (4).
b) Slide the locking handle (3)
downwards to secure it.
c) Place the snake (8) with
the thicker end first into the
head tube (7).
d) Place the blade (9) on the
snake (8).
e) Place the cutting plate (10,
11 or 15) on blade (9) and
snake (8)
f) Place the fixing ring (12)
and tigthe it with your hand.
g) Place the hopper plate (6)
as seen on illustration on
the head tube (7).
Do not block the air passage
at the bottom.
16.3 Rating plate
The rating plate with the connection and performance data can be founded beneath the
device.
17 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.
Please note
Warning
32
Publicidad
