KTM 125 FACTORY PERFORMANCE KIT Manual Del Usuario página 57

–
Use a straightedge to check the preload of the spring washers.
Guideline
The straightedge is centered and a gap can be seen on the left and right (see arrow).
Info
If the spring retainer is mounted from marking II to marking III, the gap on the left and right beco-
mes larger.
Info
If the spring retainer is mounted from marking II to marking III, the gap on the left and right beco-
mes smaller.
» If the desired preload is not achieved:
–
cq
Remove screws
» If the desired preload is not achieved:
–
cq
Remove screws
and mount the spring retainer with marking III.
and mount the spring retainer with marking I.
ASSEMBLY 5
505422-01
25