Descargar Imprimir esta página

Worx WX352L Serie Manual Del Usuario página 4

Taladro de impacto inalámbrico de 20 v

Publicidad

Idiomas disponibles

Idiomas disponibles

the workpiece, resulting in personal injury.
c) Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of
control, resulting in personal injury.
SAFETY WARNINGS FOR
BATTERY PACK
a)
Do not dismantle, open or shred battery
pack.
b) Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
c) Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box
or drawer where they may short-circuit
each other or be short-circuited by other
metal objects. When battery pack is not in use,
keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or fire.
d) Do not remove battery pack from its
original packaging until required for use.
e) Do not subject battery pack to mechanical
shock.
f)
In the event of battery leaking, do not
allow the liquid to come in contact with
the skin or eyes. If contact has been
4
made, wash the affected area with copious
amounts of water and seek medical advice.
g) Observe the plus (+) and minus (–) marks
on the battery back and equipment and
ensure correct use.
h) Do not use any battery pack which is not
designed for use with the equipment.
i)
Keep battery pack out of the reach of
children.
j)
Seek medical advice immediately if a cell
or battery has been swallowed.
k) Always purchase the battery pack
recommended by the device manufacturer
for the equipment.
l)
Keep battery pack clean and dry.
m) Wipe the battery pack terminals with a
clean dry cloth if they become dirty.
n) Battery packs need to be charged before
use. Always use the correct charger and refer
to the manufacturer's instructions or equipment
manual for proper charging instructions.
o) Do not leave battery pack on prolonged
charge when not in use.
p) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
q) Battery pack gives its best performance
when it is operated at normal room
temperature (68°F ± 9°F).
r)
When disposing of battery packs, keep
20V Cordless Impact Drill
battery packs of different electrochemical
systems separate from each other.
s)
Recharge only with the charger specified
by Worx. Do not use any charger other
than that specifically provided for use with
the equipment. A charger that is suitable
for one type of battery pack may create a
risk of fire when used with another battery
pack.
t)
Retain the original product literature for
future reference.
u) Use the battery pack only in the
application for which it was intended.
v) Remove the battery pack from the
equipment when not in use.
w) Dispose of properly.
EN

Publicidad

loading