Door Opening - Thermador T24UW820LS Guia De Instalacion

WARNING:
Never connect the appliance to electronic energy saver plugs.
This appliance can be used with mains and sine-controlled inverters. Main controlled inverters are used
for photovoltaic systems which are connected directly to the national grid.
Sine-controlled inverters must be used for isolated applications (e.g. on ships or in mountain lodges)
which are not connected directly to the national grid.
The appliance requires a 3-pole socket. The socket should be connected by an electrician only.
Where there is a 2-pole standard wall socket, it is the responsibility of the customer to have this socket
replaced with a correctly grounded 3-pole wall socket. Do not use any adapter plugs.
Be sure that the location of your Wine Reserve has a near and accessible electric socket.
2-pole standard wall socket must be replaced with a 3-pole grounded socket. Do not use adapters.

Door opening.

The door of your Wine Reserve is configured by default to have an aperture up to 110°. This makes for
easy access to the wine racks for loading or cleaning. However, if the appliance is installed under
counter, it is recommended to install the Door Stopper Pins in the hinge to avoid hitting the wall, cabinets
or another appliance installed next to the Wine Reserve.
To install the Door Stopper Pin follow the next instructions:
1. Remove the Top Hinge Cover by pulling it to the opposite direction of the Hinge. This will uncover
the Hinge mechanism and the hole for the Door Stopper Pin.
HOLE
Page | 10