Thermador T24UW820LS Guia De Instalacion página 18

3. Remove the gasket from the corners of the door pulling it gently until the two screws and two
holes are visible. The two holes must be accessible to screw the overlay frame to the door.
There are 8 holes total, two per corner.
NOTE: It is not necessary to remove the entire gasket from the door, just from the corner, enough
to access to the holes.
4. Align the overlay frame with the door and hold them firmly together while screwing them. It may
be easier with the help of another person to hold and keep the frame in place while fastening.
Using the 8 screws included in the installation kit, fasten the overlay frame to the door.
Align door and frame
These holes
must be
accessible.
Fasten together
Page | 18