Publicidad
Idiomas disponibles
Idiomas disponibles
6. To pause or stop blending process:
a. To pause blending:
Press and release (short press) the con-
trol dial once while the unit operates. The
unit will pause and the blue LED indica-
tion ring will flash. To resume, press and
release the control dial again. The white
LED indicator ring will light until the end
of the program or auto-off time (1 minute).
b. To stop or reset blending:
To stop or reset the unit, press and hold
the control dial for 2 seconds.
c. To prevent excessive stress to the motor:
Your blender incorporates an auto-stop
feature. After running continuously for
one minute, the blender will automatically
revert to Standby mode.
To dislodge food: First, be sure blender is
turned off and the unit is unplugged from
the electrical outlet. Use a rubber or plastic
spatula to help remove food lodged around
the removable blade assembly. Replace the
blender jar lid and removable measuring cup,
plug the unit into the electrical outlet, and
continue blending, if necessary. Make sure
spatula is not inside the blender jar before
blending.
To reset the overload condition: This appli-
ance features an advanced, resettable ther-
mal device. In the event of an overload con-
dition, the unit will shut down to protect the
motor from overheating. To reset the unit,
unplug the unit and let it cool for a minimum
of 15 minutes. Then, reduce the contents of
the blender jar and/or clear any jams. Restart
the unit as noted in the operating directions.
When finished blending: Unplug the blender
from the electrical outlet. Never remove
the blender jar from the motor base until the
the motor stops turning. Do not remove blade
assembly from blender jar when removing jar
from motor base. Simply lift blender jar from
motor base. Do not put hands into blender
jar when blender is plugged in.
CLEANING AND
MAINTENANCE OF
CUISINART
48-oz . GLASS JAR BLENDER
Always unplug your Cuisinart
Glass Jar Blender from the electrical outlet
before cleaning. The blender is made of
corrosion-resistant parts that are easy to clean.
Before first use and after every use, clean each
part thoroughly. Periodically check all parts
before reassembly. If any part is damaged or
blender jar is chipped or cracked, DO NOT
USE BLENDER.
To clean with Clean preset: Add several drops of
dishwashing liquid to blender jar and add 24 oz or
less of warm water. Turn the control dial to Clean
and press the button once. The unit will run for
15 seconds. Repeat, using clean tap water. Empty
blender jar and carefully rinse and dry all parts
thoroughly. Note: Check for cleanliness.
To clean manually: Empty the blender jar. Remove
the blender jar from the motor base by lifting
straight up and away. Turn the blender jar upside
down and remove the blade assembly by turning
counterclockwise.
CAUTION: Handle the blade assembly carefully.
It is SHARP and may cause injury. Do not attempt
to remove blades from blade assembly.
The blender jar must be washed in warm, soapy
water and rinsed and dried thoroughly. The
blender jar, blender jar lid, and removable mea-
suring cup are dishwasher safe. Finally, wipe
the motor base clean with a damp cloth to
remove any residue and dry thoroughly. Never
submerge the motor base in water or other liq-
uids, or place in a dishwasher.
Any other servicing should be performed by
an authorized service representative.
6
HURRICANE
®
Hurricane
®
®
48-oz.
®
Publicidad
