afx light SPECTRA-TUBES-FC Manual De Instrucciones página 6

Slave
Setting W-Dmx
Group
Display
Display Rev
Limiter
Key Lock
Frequency
DMX Fail
System Firmware
Info
Time Info
CONTROL MODES
The light can be controlled in several ways:
• Use infrared remote control, point it at individual lights and press the desired effect. Note that
the IR sensor is next to the display.
• The light can be controlled by DMX512.
• The light can also be controlled by wireless DMX, the built-in receiver Compatible with the wor-
ld's major wireless communication protocols. Whether you use Sweden or Guangzhou wireless
transceiver, we can be fully compatible with it. (Note: the transceiver is NOT included)
REMOTE CONTROL
1. SPEED adjustment: Press
gramme mode
2. ON/OFF of the remote control mode.
3. COLOUR BUTTONS
4. EFFECT BUTTONS
The light can be controlled by the infrared remote control:
Firstly choose Auto, Sound or Static mode of the tube, and exit the
interface.
• Press ON button on the remote control,the fixture automatically
exits the current mode and enters infrared remote control mode.
• Press any Static color button to select the corresponding color on
the remote panel. After the color selection, press the STROBE button and then press the Speed
button to adjust the strobe speed.
• 3-Press FLASH button to switch into Auto mode. Press the FLASH button repeatedly to browse
through the different Auto modes. In addition, press the Speed buttons to select different auto-
matic speeds.
• 4-Pressing STROBE alone will not work and needs to be used with Static color.
• 5-Press FADE will appear color fade. if press speed of effect key can adjust the speed of close fade.
• 6-Press SMOOTH to select Sound control mode. Press SMOOTH repeatedly to switch among the
different sound modes. Press the SPEED button to change the speed of the effect.
EN 6
Blue:000~255
White:000~255
Fade: 000~255
Jump: 000~255
Link RDX1--Sweden Wireless DMX
Link RDX2--Guangzhou Wireless DMX
Unlink RDX-- DMX OFF
1ch / 2ch / 3ch / 4ch / 5ch / 6ch / 7ch
on / off
on / off
M1/M2/M3
on / off
3K Hz / 22K Hz
Blackout / Sound / Auto / Hold
V1.3
(XX)H
or to set the speed in pro-
© Copyright LOTRONIC 2024