Descargar Imprimir esta página

HSM SECURIO P36s Instrucciones De Servicio página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36
WARNING
Risk of injury!
Do not reach into the paper feed slot.
Risk of injury from being pulled in!
Keep long hair, loose articles of cloth-
ing, ties, scarves, jewellery, etc. away
from feed opening. Material with the
tendency to form loops, e.g. tapes,
strapping material, etc. must not be
shredded.
Beware of injury when using the CD splitter
Wear goggles when destroying CDs in ma-
chines without a separate CD cutting unit.
WARNING
Dangerous mains voltage!
Improper handling of the machine can
lead to an electric shock.
– Before you insert the power plug, make sure
that the voltage and frequency of your power
supply comply with the information on the
name plate.
– Make sure that the power plug is easily ac-
cessible.
– Make sure that no water gets into the shred-
der. Do not immerse the power cable or the
power plug in water.
– Never touch the power plug with wet hands.
– Never pull the plug out of the socket using
the power cable. Always pull out the plug
directly.
– Only use the machine in a dry room indoors.
Never operate the machine in damp rooms
or in the rain.
12
Check the machine and cable regu-
larly for damage. Switch the shred-
der off if it is damaged or not work-
ing correctly or before relocating or
cleaning it and disconnect it from
the mains.
– Keep the machine, the plug and cable away
from open fi re and hot surfaces. The ventila-
tion slots must not be blocked or covered
and there must be at least 5 cm space be-
tween the shredder and any wall or furniture.
Service work may only be carried
out by HSM Customer Service or by
the service technicians of our con-
tractual partners.
See page 92 for our customer ser-
vice addresses.
Notice
Danger from improper use
Only operate this machine in accordance with
the instructions outlined in "Proper use".
3 Commissioning
Before starting up the machine for the fi rst time,
open the door and remove the three wing nuts
of the transport locks from the base plate under
the cutting unit.
SECURIO P 36
english
05/2012

Publicidad

loading

Este manual también es adecuado para:

Securio p36