MAHLE X30 Manual De Usuario página 14

3.2.2. Switching the system on and off
•
Switching the system on. Press the button on the
main unit once to turn on the system. The LED on
the main control unit will light up and a welcome an-
imation will be displayed. If everything is correct, the
LED will show the battery charge status in white.
•
Switching the system off: To turn off the system,
simply press and hold the button on the main unit for
2 seconds until the LED shows a goodbye anima-
tion, after which the LED will turn off.
•
Switching the system off automatically: When
there is no speed and the phone with the app is not
connected to the e-bike, the system will automatical-
ly shut down after 5 minutes to save battery power.
The system can be switched on again at any time by
following the normal procedure. This automatic shut-
down process also occurs during the charging pro-
cess when the internal battery reaches 100 % charge.
3.2.3. Assistance levels
The system's engine provides pedalling assistance to the
cyclist. There are different levels of assistance which dif-
fer in peak power, acceleration and reactivity they offer.
The levels of assistance can be changed using different
methods:
•
Through the main control system. To increase
the level of assistance, briefly press the button on
the main control unit and the level of assistance will
increase. Once the highest level of assistance has
been reached, the system will restart the unassisted
cycle by pressing the button.
NOTICE
Before the bike is switched off, the system saves the last
selected assistance level, but if an error occurs before
the bike is switched off, the assistance level will be 0.
•
By means of the electronic gears: The system will
enable the optional addition of electronic shifters.
These changes are based on 2 small micro-buttons
that can be installed on the handlebars. If these 2 re-
mote buttons are connected to the main control unit,
you can additionally control the e-Bike assistance by
using them when the system is switched on.
Operation
Short press of left button
Short press of right button
Hold down left button
Hold down right button
•
Control the level of assistance via the Pulsar
ONE display: You can use your X30 system with
the Pulsar ONE wireless display that shows all the
information: speed, current assistance level, battery
charge level, time, distance, power, etc. Pulsar ONE
and your e-Bike communicate automatically via
ANT+. The Pulsar ONE display includes 3 buttons: a
small one in the centre and two large ones on each
side, so, with this accessory, you can also control
the assistance of your e-Bike when it is on using the
left and right buttons of the Pulsar ONE display.
Operation
Short press of left button
Short press of right button
Long press of left button
Long press of right button
015
Action
Decrease assistance
Increase assistance
Nothing
Activate "Walk" mode
Action
Decrease assistance
Increase assistance
Turn the lights on/off
Nothing