Humanscale QuickStand Eco Instrucciones De Montaje página 3

Attach Main column to Base
1
Install the main post onto the base by inserting the tab in the front first,
and then secure with the M5x5mm screws provided.
2
Remove the protective film from the plastic caps and snap them in over
the screws.
Attach Work Surface
1
Slide the work surface, with preinstalled screw,
into the slot in the support bracket. This will allow
you to support the work surface with one hand
and use your other hand to insert and secure the
other two screws.
2
Tighten all M8x21mm screws securely with the
6mm hex key.
Attach Plastic Cover
1
Install the column plastic cover.
3