Humanscale QuickStand Eco Instrucciones De Montaje página 5

Remove Safety Lock
1
Push the keyboard platform down
to remove the lock piece.
Calibrate the Counterbalance System
Before making any adjustments to the tension, check to see if an adjustment is needed.
Test the balance of the system after you have installed all of your peripherals (ie. laptop on surface and/
or you have installed your monitor(s), keyboard and mouse). By grabbing both side edges of the work
surface you should be able to seamlessly raise and lower the platform.
If the work surface holds its position after you move it — meaning that you don't feel the platform
attempting to raise or lower on its own — then no tension adjustment is needed.
If the surface does move upward or downward after you change position, then refer to the information
in Scenario A and Scenario B in the following page.
5