Publicidad
Idiomas disponibles
Idiomas disponibles
3. Setting Menu
Switch to SETUP mode, Press
• Mode: Photo, Video, Photo+Video. Default: Photo
Select whether photos or videos should be taken when motion is detected. When
in the "Photo+Video" mode, the camera first takes a set number of photos prior to
recording a video.
• PIR Interval: 5s-60mins. Default: 30s
The shorter the PIR interval, the higher frequency of camera shooting, and the higher
power consumption will a ect the battery life. On the contrary, if the delay time is
long, the power consumption, which will be reduced to ensure the long-term use
of the battery.
Note: In photo mode, the shortest PIR Interval can be set is 5s. If it is in video mode
or photo+video mode, the shortest PIR Interval can be set is 10s.
• PIR Sensitivity: High/Medium/Low. Default: Medium
Select sensitivity according to application conditions.
Select "High" for interior areas and environments with little interference.
Select "Medium" for exterior areas and the environments with a normal amount of
interference.
Select "Low" for an environments with a high level of interference.
• Time-lapse: O /On. Default: O
Press "ON" to set the time interval, and set the values of Hour, Minute, and Second.
For example, if you want to record flowers blooming, time-lapse can be used. The
camera automatically takes pictures in every set time interval.
Note: If you select "ON", PIR Interval and PIR Sensitivity will not be available!
button to get into the setting menu.
9
EN
Publicidad
