Descargar Imprimir esta página

iZEEKER iG600 Manual De Usuario página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• IR LED: Auto/Medium/Low/O . Default: Auto
Used to set the brightness of the infrared light.
EN
• Low Battery at Night: No IR Led/No Recording. Default: No Recording
No Recording: The camera will not take pictures or videos under low power conditions.
No IR Led: Take all black photos and videos after the wildlife camera is triggered
under low power conditions.
• Monitoring Period: O /On. Default: O
Timer 1 Start/Timer 1 Stop
Timer 2 Start/Timer 2 Stop
Select "ON" to turn on this function, and set the Timer 1 and Timer 2 to set the
starting and ending working time.
The camera will not be triggered and will not take any photos or videos beyond
this period.
• Side PIR Setup: O /On. Default: On
The two side PIR sensors provide a wider detection angle.
• Frequency: 50Hz/60Hz
• Image Size: Daytime/Nighttime
Daytime: Selects from 2MP to 48MP. Default: 13MP
Nighttime: Selects from 1MP to 10MP. Default: 2MP
Note: Higher resolution produces better quality images, but creates larger files that
take up more of the SD card capacity.
Daytime 13MP and Nighttime 2MP are the recommended default for good resolution
and smaller size.
• Picture NO.: 1-10 Photos. Default: 1photo
• Shutter speed: 1/15, 1/20, 1/30. Default: 1/30
11

Publicidad

loading