Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
• Choose a solid tree that does not move in the wind, as the movement will cause
false detection.
• Make sure the area in front of your camera is free of branches or twigs that could be
moved away by the wind.
• The camera should be set at the same height of the animal's mid-body.
5. Sensing and Distance Test
To test whether the trail camera can e ectively monitor the area you choose, this
test is recommended to check the sensing angle and monitoring distance of the
trail camera. To perform the test:
• Switch the trail camera to the SETUP mode.
• Make parallel movements in front of the camera at several positions within the area
where you expect the game or subjects to be. Try di erent distances and angles
from the camera.
• If the motion indicator LED light blinks, it indicates that the position can be sensed.
If it does not blink, that position is outside of the sensing area.
• The results of your testing will help you find the best placement when mounting
and aiming the trail camera. The height away from the ground for placing the device
should vary with the animal size appropriately. In general, 3 to 6 feet is preferred.
• You can avoid potential false triggers due to temperature and motion disturbances
in front of the camera by not aiming it at a heat source or nearby tree branches or
brush (especially on windy days).
15
EN
Publicidad
