stayer SCR255W Manual De Instrucciones página 27

Protect the saw blade from strikes and shocks. Do not apply
side pressure to the saw blade.
Use only sharp, flawless saw blades. Change cracked, bent
or dull saw blades without delay.
Select a saw blade suitable for the material to be worked.
Use only saw blades recommended by the manufacturer of
the electro-tool.
Observe the instructions of the manufacturer for the
mounting and usage of the saw blade.
Actuate the spindle lock only when the saw blade is at a
standstill.
The saw blade becomes very hot while working; do not take
hold of it until it has cooled.
Wear protective gloves to avoid injury from the sharp
cutting edges of the saw blade during changing the saw
blade.
Observe the dimensions of the saw blade. The hole
diameter must fit the tool spindle without play. Do not use
reducer pieces or adapters.
Observe the maximum allowable speed of the saw blade.
Saw blades of highly alloyed high speed steel (HSS steel)
are not to be used.
Remove the sawdust regularly from the carbon brush
holder of the electric motor by blowing out with compressed
air.
Stayer can ensure flawless functioning of the machine only
when original accessories intended for the machine are
used.
ENGLISH
26
26