Maintenance And Service; Declaration Of Conformity - stayer SCR255W Manual De Instrucciones

Maintenance and service

Maintenance
After each 2,000 hours of use or each two years the
electrical tool must be sent to the official technical service
for maintenance and complete revision.
Except for the operation of changing brushes, the machine
does not require any special maintenance by the user.
Keep the machine clean and use it correctly. Regularly
have the correctness of the adjustments checked by a
sufficiently trained user. In the case of any failure, contact
our technical service.
Repair service of the manufacturer or
commercial agent
Stayer Ibérica S.A. Área Empresarial de Andalucía - Sector
1, Calle Sierra de Cazorla No. 7. Postal code: 28320 Pinto
(Madrid) Spain.
ENGLISH
31

Declaration of Conformity

EU DECLARATION OF CONFORMITY
The undersigned: STAYER IBÉRICA S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía
Sector 1 - 28320 PINTO (MADRID)
Tel.: 91 691 86 30/ Fax: 91 691 91 72
CERTIFIES,
That the machine:
Type: COMBINED MITRE SAWING AND
BENCH SAWING MACHINES.
Model: SCR255W
Are in conformity with the provisions of Directive 98/37/EU
As well as with the following regulations:
· UNE-EN-61029-1
· UNE-EN-61029-1/A11
· UNE-EN-61029-1/A12
· UNE-EN-61029-2/9
· UNE-EN-61029-2-11
· UNE-EN ISO 12100-1
· UNE-EN ISO 12100-2
· Directive 2004/108/EU
· Directive 2006/95/EU.
It has received a Type Certificate with the number
43/3M/02/000025 (SCR255W)
Issued by the notified body:
0056 ECA, ENTIDAD COLABORADORA
DE LA ADMINISTRACIÓN S.A.U.
Av. Roma, 21
Signed: Ramiro de la Fuente
Director General
31
43005 TARRAGONA