Bevel Gear; Guard - Efco DS 2200 Manual De Instrucciones

screen and substitute it when holes, bends
or deformations appear;
- check carefully if dust, debris or organic
material is in contact with parts of the Spark
en
Arrester System; clean it often with tools or
shop air.
If the screen needs to be replaced, please
order the whole inner part p.n. 61370017R
(E) and 58070144R (D).
WARNING: Do not operate your
brush cutter if the muffler is
damaged, missing or modified.
An
muffler will increase the risk of
fire and hearing loss.

Bevel Gear

Fill with grease using the correct tube to the
level of the lower lip of the access hole (D,
Fig. 8). Do not use more than 0.02 lb (10
grams).
30
MAINTENANCE
improperly maintained
CAUTION: do not use a grease
gun. The high pressure can
damage the bearings and seals.
Use high quality molybdenum bisulphide
grease.

Guard

WARNING: If the cutting tool or
deflector becomes clogged or
stuck, always turn off the engine
and make sure the cutting tool
has stopped before cleaning.
Grass, weeds, etc. should be
cleaned off the cutting tool at
regular intervals.
Replace guard if damaged.