Publicidad
Idiomas disponibles
Idiomas disponibles
above the top edge of the tank. Verify that the rack is secured in place as shown in Fig. 9. Then
squeeze in the other hose storage rack and insert it into the corresponding channel making sure
it is secured (Fig. 7 - 10).
8. Insert the handle into the slots located on the top of the powerhead and secure it with the
screws provided. Do not over-tighten screws (Fig. 11).
page 15 for installation instructions (Fig. 12 & 13).
care not to damage the bag (Fig. 14).
NOTE: The dust collection bag is for dry pick-up only.
12. Place the powerhead back on the collection tank aligning the top section with the latches, and
snap into place (Fig. 16).
14. Insert the locking end of the hose into the vacuum port of the collection tank and lock into place
(Fig. 17).
15. Choose the desired accessory and insert onto the free end of the hose or extension wand (Fig.
18).
POLARIZED PLUG
To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the
Do not change the plug in any way. Double insulation
grounded power cord and grounded power supply system.
eliminates the need for the three-wire
9
Publicidad
